We're going to show you how to set up and install your MosoLabs Leaf Camera.

Everything you need to get started is included in the box.

All you need is a phillips head screwdriver to mount your camera.

Download the Mosolabs app from the google play or the apple app store.  

Follow the steps in the MOSO app to finish setting up your Leaf Camera.

1. Let's set up your locations by entering your address. Note that the App will not provide an address format suggestion.

2. Give your new home a name.

3. Are you expecting to set up the devices in a certain area or room?

4. Confirm Your Address to start pairing the device to your home.

1. Insert the SIM card for external storage. Use a screwdriver to remove the screw and open the cover to insert the SIM card if needed.

2. Check sim card slot position.

3. Notice a missing corner of the new SIM card.
Put the SIM card in the battery camera, because of the missing corners, it can only be loaded in a specific orientation. 

1. You can charge your camera battery using the Micro USB cable.
(Please make sure it is fully charged for first time use)

Solid Red         The battery pack is charging.
Solid Green     The charging is complete.

2. Slide the battery pack to the camera

You can expect the LED to turn solid blue as the device boots up.

After the camera successfully boots up, it'll try to connect to the network with the LED quickly flashing green.

When the network is connected successfully, the LED will then turn solid green with a audio prompt "mobile network is connected. Camera is ready to pair."

The first time CBRS connection will take up to 2 min.
So please wait patiently.

1. Find the "Add Devices" icon on the top right corner of the Dashboard.

2. Choose your device category.

1. After reading the installation guide or video from the mobile App, tap next to start scanning the QR code.

2. You can find the qr code found at the bottom of the device.

3. Now scan the QR code by placing the QR code.

4. Waiting for device to connect server. Depending on the network strength and speed, this step can takes up to 4 minutes.

5. You device is added to your home successfully. Now you can choose to add it to a certain room or area, whether existed or newly created, or just add it under the home.

1. Using the included wall mount and screw kit, you can place the mount on any flat surface inside or outside of your home..

2. Position the wall mount with the arrow pointing upward, then use the included screws to secure the mount to the surface.

3. Next, secure the camera into the mount rotating clockwise until the camera is firmly screwed in.

4. Test the battery camera to make sure it's securely mounted

Now you can use Leaf camera to protect your home.

To learn more, visit the Mosolabs help center.